Handle, Reclining Adjuster Release, RH
72525-0K020-E1
Superseded / ended 2012-04
PNC 72525B
General
Fitting notes
SAND BEIGE,TRIM4#
Fitment
Codes the factory prints against this line. Hover for the catalogue's own expansion.
GGN50
LHD;GGN50
5FC
Atm, 5-Speed Floor Shift
SA;GGN60,KUN50
4FC,5FC;KUN51,6#,LAN50,TGN51,61
- Fits
- Fortuner GGN50,60,KUN5#,6#,LAN50,TGN51,61
- Valid
- 2008-08 → 2012-04
- Model period
- 408W
- Destination †
- 01
- Catalogue page †
- Trim codes
- 4#
† Read from the record layout but confirmed by no published legend.
Shown on
Interchangeable numbers
| Number | Alternative | Effective |
|---|---|---|
| 72525-0K020-A0 | 72525-0K020-E0 | 2019-05 |
| 72525-0K020-B0 | 72525-0K020-B1 | 2021-08 |
| 72525-0K020-E1 | 72525-0K020-E0 | 2024-04 |
| 72525-0K020-A0 | 72525-0K020-E0 | 2019-05 |
| 72525-0K020-B0 | 72525-0K020-B1 | 2021-08 |
| 72525-0K020-E1 | 72525-0K020-E0 | 2024-04 |
Suffix variants
What the two-character suffix on this number selects. Despite the source field being named for colour, it describes whatever the suffix varies — colour, trim, or a bearing size grade.
| Suffix | Description |
|---|---|
| A0 | Ivory |
| B0 | Gray |
| B1 | MD.Gray |
| B2 | DK.Gray |
| C0 | Black |
| E0 | Grege |
| E1 | Sand Beige |
Other lines in this group
| Part number | Period | Status |
|---|---|---|
| 72525-0K020-A0 | 2005-09 → 2008-10 | Superseded / ended 2008-10 |
| 72525-0K020-A0 | 2005-01 → 2009-03 | Superseded / ended 2009-03 |