Cover, Reclining Adjuster Inside, RH (FOR LH SEAT)
71875-0K120-C0
Superseded / ended 2021-04
PNC 71875G
General
Fitting notes
BLACK,TRIM4#
Fitment
Codes the factory prints against this line. Hover for the catalogue's own expansion.
GUN156
KZS,LA,PKN)
156
Roller OD=3.504, Refer TO Repair Manual
(H,L)
6F
Mtm, 6-Speed Floor Shift
(AGTSU,THSUV)
(ARL,GCC);GUN156
LHD
Left-hand Drive Vehicles
(GCC,LA);TGN156,166
M;GUN156,TGN168
(AGTSU,THSUV)
L
L(MODEL MARK)
(AGTSU,PKNSU,THSUV)
(L,M,S)
BZAGT;GUN165
(L,M,S)
(AGTSU,THSUV)
HDCR;GGN155,165,GUN155,KUN
(BZAGT,GCC,
(H,L,S);GUN156
THSUV
Thailand Produced Suv Wagon
- Fits
- Fortuner GGN155,165,GUN15#,16#,KUN156,165,LAN155,TGN156,16#
- Valid
- 2015-07 → 2021-04
- Model period
- 578W
- Destination †
- 01
- Catalogue page †
- Trim codes
- 4#
† Read from the record layout but confirmed by no published legend.
Shown on
Suffix variants
What the two-character suffix on this number selects. Despite the source field being named for colour, it describes whatever the suffix varies — colour, trim, or a bearing size grade.
| Suffix | Description |
|---|---|
| C0 | Black |
Other lines in this group
| Part number | Period | Status |
|---|---|---|
| 71875-0K120-C0 | 2015-07 → 2019-02 | Superseded / ended 2019-02 |
| 71875-0K120-C0 | 2015-07 → 2017-08 | Superseded / ended 2017-08 |
| 71875-0K120-C0 | 2015-07 → 2017-08 | Superseded / ended 2017-08 |
| 71875-0K120-C0 | 2015-07 → 2020-05 | Superseded / ended 2020-05 |
| 71875-0K120-C0 | 2015-07 → 2021-01 | Superseded / ended 2021-01 |
| 71875-0K130-C0 | 2018-06 → 2020-05 | Superseded / ended 2020-05 |
| 71875-0K130-C0 | 2017-08 → 2020-09 | Superseded / ended 2020-09 |
| 71875-0K130-C0 | 2017-08 → 2020-05 | Superseded / ended 2020-05 |
| 71875-0K130-C0 | 2017-08 → 2020-05 | Superseded / ended 2020-05 |
| 71875-0K130-C0 | 2017-08 → 2020-05 | Superseded / ended 2020-05 |
| 71875-0K130-C0 | 2018-06 → 2020-05 | Superseded / ended 2020-05 |
| 71875-0K130-C0 | 2019-02 → 2021-04 | Superseded / ended 2021-04 |
| 71875-0K130-C0 | 2018-06 → 2020-05 | Superseded / ended 2020-05 |
| 71875-0K130-C0 | 2018-06 → 2020-05 | Superseded / ended 2020-05 |
| 71875-0K130-C0 | 2016-03 → 2020-09 | Superseded / ended 2020-09 |
| 71875-0K130-C0 | 2016-01 → 2020-09 | Superseded / ended 2020-09 |
| 71875-0K130-C0 | 2017-08 → 2018-06 | Superseded / ended 2018-06 |
| 71875-0K130-C0 | 2016-03 → 2018-06 | Superseded / ended 2018-06 |
| 71875-0K130-C0 | 2016-01 → 2018-06 | Superseded / ended 2018-06 |
| 71875-0K130-C0 | 2017-05 → 2021-01 | Superseded / ended 2021-01 |
| 71875-0K130-C0 | 2017-08 → 2018-05 | Superseded / ended 2018-05 |
| 71875-0K130-C0 | 2017-08 → 2021-04 | Superseded / ended 2021-04 |
| 71875-0K150-C0 | 2015-12 → 2020-10 | Superseded / ended 2020-10 |
| 71875-0K150-C0 | 2015-12 → 2019-07 | Superseded / ended 2019-07 |
| 71875-0K150-C0 | 2017-10 → 2019-07 | Superseded / ended 2019-07 |
| 71875-0K150-C0 | 2015-12 → 2020-10 | Superseded / ended 2020-10 |
| 71875-0K150-C0 | 2015-12 → 2020-10 | Superseded / ended 2020-10 |
| 71875-0K150-C0 | 2017-10 → 2020-10 | Superseded / ended 2020-10 |
| 71875-0K160-C0 | 2016-03 → 2020-09 | Superseded / ended 2020-09 |
| 71875-0K180-C0 | 2016-01 → 2016-05 | Superseded / ended 2016-05 |
| 71875-0K180-C0 | 2016-05 → 2020-08 | Superseded / ended 2020-08 |
| 71875-0K180-C0 | 2016-01 → 2020-08 | Superseded / ended 2020-08 |
| 71875-0K180-C0 | 2016-01 → 2016-05 | Superseded / ended 2016-05 |
| 71875-0K190-C0 | 2016-05 → 2019-05 | Superseded / ended 2019-05 |
| 71875-0K190-C0 | 2016-01 → 2016-05 | Superseded / ended 2016-05 |
| 71875-0K190-C0 | 2017-08 → 2018-05 | Superseded / ended 2018-05 |
| 71875-0K190-C0 | 2017-08 → 2018-05 | Superseded / ended 2018-05 |
| 71875-0K190-C0 | 2016-01 → 2018-06 | Superseded / ended 2018-06 |
| 71875-0K190-C0 | 2016-01 → 2018-06 | Superseded / ended 2018-06 |