Handle, Seat Track Adjusting
72211-0K180-C1
Superseded / ended 2021-04
PNC 72211C
General
Fitting notes
BLACK,TRIM4#
Fitment
Codes the factory prints against this line. Hover for the catalogue's own expansion.
156
Roller OD=3.504, Refer TO Repair Manual
(H,L)
GUN156
(L,M,S);GGN155,165,GUN165,KUN156,LAN155
6F
Mtm, 6-Speed Floor Shift
(AGTSU,PKNSU,SASUV,THSUV)
(ARL,GCC);GUN155,166
(AGTSU,SASUV,THSUV)
M;TGN166
(L,M,S)
(SASUV,THSUV)
(GCC,LA,SA,TH);GUN
(GCC,SA);TGN156
HDCR
High Power Diesel Common Rail
AGTSU,PKNSU,THSUV;GUN156,TGN16#
(AGTSU,SASUV,THSUV)
L
L(MODEL MARK)
(BZAGT,GEN,LA,PKN,SA)
(BZAGT,SA);GUN156
THSUV
Thailand Produced Suv Wagon
- Fits
- Fortuner GGN155,165,GUN15#,16#,KUN156,165,LAN155,TGN156,16#
- Valid
- 2016-10 → 2021-04
- Model period
- 578W
- Destination †
- 01
- Catalogue page †
- Trim codes
- 4#
† Read from the record layout but confirmed by no published legend.
Shown on
Suffix variants
What the two-character suffix on this number selects. Despite the source field being named for colour, it describes whatever the suffix varies — colour, trim, or a bearing size grade.
| Suffix | Description |
|---|---|
| C0 | Black |
| C1 | Black |
Other lines in this group
| Part number | Period | Status |
|---|---|---|
| 72211-0K180 | 2015-12 → 2016-10 | Superseded / ended 2016-10 |
| 72211-0K180 | 2015-12 → 2016-10 | Superseded / ended 2016-10 |
| 72211-0K180 | 2015-12 → 2016-10 | Superseded / ended 2016-10 |
| 72211-0K180 | 2016-10 → 2017-09 | Superseded / ended 2017-09 |
| 72211-0K180 | 2020-07 → 2020-10 | Superseded / ended 2020-10 |
| 72211-0K180-C0 | 2015-07 → 2016-10 | Superseded / ended 2016-10 |
| 72211-0K180-C0 | 2015-07 → 2016-10 | Superseded / ended 2016-10 |
| 72211-0K180-C1 | 2017-10 → 2021-04 | Superseded / ended 2021-04 |
| 72211-0K180-C1 | 2017-05 → 2021-01 | Superseded / ended 2021-01 |
| 72211-0K180-C1 | 2016-10 → 2020-12 | Superseded / ended 2020-12 |
| 72211-0K180-C1 | 2017-10 → 2020-10 | Superseded / ended 2020-10 |
| 72211-0K180-C1 | 2016-10 → 2020-10 | Superseded / ended 2020-10 |
| 72211-0K180-C1 | 2016-10 → 2020-10 | Superseded / ended 2020-10 |
| 72211-0K180-C1 | 2018-04 → 2020-07 | Superseded / ended 2020-07 |
| 72211-0K180-C1 | 2017-10 → 2020-03 | Superseded / ended 2020-03 |
| 72211-0K180-C1 | 2017-10 → 2020-03 | Superseded / ended 2020-03 |
| 72211-0K180-C1 | 2016-10 → 2020-03 | Superseded / ended 2020-03 |
| 72211-0K180-C1 | 2016-10 → 2020-03 | Superseded / ended 2020-03 |
| 72211-0K180-C1 | 2016-12 → 2019-01 | Superseded / ended 2019-01 |
| 72211-0K180-C1 | 2016-10 → 2017-10 | Superseded / ended 2017-10 |
| 72211-0K180-C1 | 2016-10 → 2017-10 | Superseded / ended 2017-10 |
| 72211-0K190 | 2016-10 → 2020-07 | Superseded / ended 2020-07 |
| 72211-0K190 | 2020-04 → 2020-07 | Superseded / ended 2020-07 |
| 72211-0K190-C1 | 2016-10 → 2020-04 | Superseded / ended 2020-04 |
| 72211-0K190-C1 | 2016-10 → 2020-08 | Superseded / ended 2020-08 |
| 72211-0K190-C1 | 2016-08 → 2016-10 | Superseded / ended 2016-10 |
| 72211-0K190-C1 | 2016-08 → 2016-10 | Superseded / ended 2016-10 |
| 72211-0K190-C1 | 2016-08 → 2016-10 | Superseded / ended 2016-10 |
| 72211-0K190-C1 | 2016-08 → 2016-10 | Superseded / ended 2016-10 |