Switch Assy, Steering Pad
84250-0K100-C1
Superseded / ended 2024-10
PNC 84250A
General
Fitting notes
BLACK/SILVER 21SV85,TRIM2#
Fitment
Codes the factory prints against this line. Hover for the catalogue's own expansion.
GUN135
MTM
Manual Transmission
L
L(MODEL MARK)
SA
South Africa
SA;GUN122,125
RHD
Right-hand Drive Vehicles
SA;GUN125
LHD
Left-hand Drive Vehicles
SCB
Single Carburetor:Single Cab
SA;GUN126,LAN125,TGN120
SCB
Single Carburetor:Single Cab
- Fits
- Hilux (SCB/XTR) GUN11#,12#,13#,LAN125,TGN11#,12#,136,XPN135
- Valid
- 2023-08 → 2024-10
- Model period
- 975W
- Destination †
- 01
- Catalogue page †
- Trim codes
- 2#
† Read from the record layout but confirmed by no published legend.
Shown on
Interchangeable numbers
| Number | Alternative | Effective |
|---|---|---|
| 84250-0K100-C0 | 84250-0K100-C1 | 2017-08 |
| 84250-0K100-C0 | 84250-0K100-C1 | 2017-08 |
Suffix variants
What the two-character suffix on this number selects. Despite the source field being named for colour, it describes whatever the suffix varies — colour, trim, or a bearing size grade.
| Suffix | Description |
|---|---|
| C0 | Black |
| C1 | Black/Silver 21SV85 |
Other lines in this group
| Part number | Period | Status |
|---|---|---|
| 84250-0K100-C1 | 2023-08 → 2024-12 | Superseded / ended 2024-12 |
| 84250-0K100-C1 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K100-C1 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K100-C1 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K100-C1 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K100-C1 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K100-C1 | 2023-08 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K100-C1 | 2023-08 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K100-C1 | 2024-01 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K180-C1 | 2023-11 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K310 | 2023-08 → 2023-12 | Superseded / ended 2023-12 |
| 84250-0K310 | 2023-08 → 2023-12 | Superseded / ended 2023-12 |
| 84250-0K310-C1 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K310-C1 | 2023-08 → 2024-12 | Superseded / ended 2024-12 |
| 84250-0K310-C1 | 2023-08 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K310-C1 | 2023-08 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K310-C1 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K310-C1 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K310-C1 | 2023-12 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K310-C2 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K310-C2 | 2023-08 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K320-C1 | 2023-11 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K320-C1 | 2023-11 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K370-C1 | 2023-08 → 2024-07 | Superseded / ended 2024-07 |
| 84250-0K400-C1 | 2023-11 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K400-C1 | 2023-11 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K420-C0 | 2024-02 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K420-C1 | 2024-02 → 2024-10 | Superseded / ended 2024-10 |
| 84250-0K470-C0 | 2023-11 → 2024-07 | Superseded / ended 2024-07 |