Handle, Vertical Adjusting, RH
72494-02150-C0
Superseded / ended 2021-02
PNC 72494
United States
Fitting notes
BLACK,TRIM2#
Fitment
Codes the factory prints against this line. Hover for the catalogue's own expansion.
GUN126
6F
Mtm, 6-Speed Floor Shift
KEN;GGN125,135,GUN126,136,KUN126
RHD
Right-hand Drive Vehicles
M
M(MODEL MARK)
SA
South Africa
- Fits
- Hilux GGN1##,GUN1##,KUN1##,LAN125,TGN1##
- Valid
- 2016-01 → 2021-02
- Model period
- 578W
- Destination †
- 01
- Catalogue page †
- Trim codes
- 2#
† Read from the record layout but confirmed by no published legend.
Shown on
Suffix variants
What the two-character suffix on this number selects. Despite the source field being named for colour, it describes whatever the suffix varies — colour, trim, or a bearing size grade.
| Suffix | Description |
|---|---|
| C0 | Black |
Other lines in this group
| Part number | Period | Status |
|---|---|---|
| 72494-02150-C0 | 2017-10 → 2020-09 | Superseded / ended 2020-09 |
| 72494-02150-C0 | 2017-10 → 2020-09 | Superseded / ended 2020-09 |
| 72494-02210-C0 | 2015-05 → 2019-05 | Superseded / ended 2019-05 |
| 72494-02210-C0 | 2015-05 → 2020-05 | Superseded / ended 2020-05 |
| 72494-02210-C0 | 2015-05 → 2020-05 | Superseded / ended 2020-05 |
| 72494-02210-C0 | 2015-05 → 2020-05 | Superseded / ended 2020-05 |
| 72494-02210-C0 | 2019-05 → 2020-05 | Superseded / ended 2020-05 |
| 72494-02210-C0 | 2019-05 → 2020-05 | Superseded / ended 2020-05 |
| 72494-02210-C0 | 2019-05 → 2020-05 | Superseded / ended 2020-05 |
| 72494-02210-C0 | 2019-05 → 2020-05 | Superseded / ended 2020-05 |
| 72494-02210-C0 | 2015-05 → 2020-12 | Superseded / ended 2020-12 |
| 72494-02210-C0 | 2018-09 → 2020-12 | Superseded / ended 2020-12 |
| 72494-02210-C0 | 2015-05 → 2021-05 | Superseded / ended 2021-05 |